Does anyone happen the same? it remains frozen, as if thinking what to do, forever.
0 Votes
13 Comments
Sorted by
C
Communityposted
10 months ago
Admin
Posted by “Drosselmeyer” on August 18, 2023.
[Archived]
Okay. I tried your FBX and I am seeing the issue. I will write up and attach your FBX to the ticket. It may be something intermittent and that is why it worked for @MightySe7en, but not for me.
UPDATE: It did work eventually, so it appears that this is intermittent.
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “Mocapanimations” on August 18, 2023.
[Archived]
@Drosselmeyer seems to work with meshes, but not with the animation, in IMVU creator works perfectly.
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “Drosselmeyer” on August 16, 2023.
[Archived]
@Mocapanimations, Is this happening with just the one skeleton animation FBX or all FBXs?
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “Mocapanimations” on August 13, 2023.
[Archived]
Hi again, thank you @MightySe7en but doesn't work, I also installed the recent update and no luck. Is very interesant for me since from Studio I can make unisex animations, so I don't need to upload a lot of versions of same animation.
What I'm doing right now @BloodyHanna is importing the FBX in IMVU creator, get the generated .xaf, and add it to Studio, but will be more eficient and simple if I could do it in Studio.
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “BloodyHanna” on August 13, 2023.
[Archived]
I mean post it in shop but do not send it to peer and it will show in the studio
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “BloodyHanna” on August 13, 2023.
[Archived]
I have a simular problem and the staff is still looking into it...i did find a loophole how to use the studio - till it starts working properly ( my problem is that the FBX is unknown it just dusn't download properly, donno why)
But now i use the old client to upload my project the moment i save it ( as a project, do not put it for sale yet and don't go to peer) , thankfully after you open the studio its shown and you can finish editing it in there .
this I share as an alternative if you are unable to work it out. I do hope it works out and you don't have to do those gymnastics :)
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “MightySe7en” on August 08, 2023.
[Archived]
@Mocapanimations Try going to "Documents/IMVU Studio Projects/[CID]" and removing the "_fbx" folder. You should back up this folder before deleting it just in case. I believe your issue may be with this folder being too large, it is an issue we have been looking into, and the size of the folder seems to vary by user.
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “MightySe7en” on August 08, 2023.
[Archived]
Hey @Mocapanimations , I tried importing the file myself and it worked. I believe the issue is with studio and we have seen it before. I will talk to my team and get the solution to you ASAP!
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “Mocapanimations” on August 08, 2023.
[Archived]
Email sent @MightySe7en , thank you so much :)
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “MightySe7en” on August 07, 2023.
[Archived]
@Mocapanimations If you are comfortable doing so, could you email your FBX to studio@imvu.com and I will take a deeper look
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “Mocapanimations” on August 06, 2023.
[Archived]
Hi @MightySe7en and @LestatDeLioncourt , the FBX contains only skeleton animation, and isn't a heavy one, just 2846kb.
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “LestatDeLioncourt” on August 06, 2023.
[Archived]
Also, just to add in conversation... I have seen this with super heavy FBX Files.
What is the Kb Size of your File, @Mocapanimations ?
0 Votes
C
Communityposted
10 months ago
Admin
Posted by “MightySe7en” on August 05, 2023.
[Archived]
Hi @Mocapanimations,
Is this a workflow you've done before? That way we know the issue is likely with studio and not the file. I have had issues in the past when I import an animation and there's no actual animation data, it will just sit and load.
0 Votes
People who like this
Delete Comment
This post will be deleted permanently. Are you sure?
Edit Comment
Edit Topic
Delete Comment
This post will be deleted permanently. Are you sure?
Posted by “Mocapanimations” on August 05, 2023.
[Archived]Hello everyone :)
Does anyone happen the same? it remains frozen, as if thinking what to do, forever.
0 Votes
13 Comments
Community posted 10 months ago Admin
Posted by “Drosselmeyer” on August 18, 2023.
[Archived]Okay. I tried your FBX and I am seeing the issue. I will write up and attach your FBX to the ticket. It may be something intermittent and that is why it worked for @MightySe7en, but not for me.
UPDATE: It did work eventually, so it appears that this is intermittent.
0 Votes
Community posted 10 months ago Admin
Posted by “Mocapanimations” on August 18, 2023.
[Archived]@Drosselmeyer seems to work with meshes, but not with the animation, in IMVU creator works perfectly.
0 Votes
Community posted 10 months ago Admin
Posted by “Drosselmeyer” on August 16, 2023.
[Archived]@Mocapanimations, Is this happening with just the one skeleton animation FBX or all FBXs?
0 Votes
Community posted 10 months ago Admin
Posted by “Mocapanimations” on August 13, 2023.
[Archived]Hi again, thank you @MightySe7en but doesn't work, I also installed the recent update and no luck. Is very interesant for me since from Studio I can make unisex animations, so I don't need to upload a lot of versions of same animation.
What I'm doing right now @BloodyHanna is importing the FBX in IMVU creator, get the generated .xaf, and add it to Studio, but will be more eficient and simple if I could do it in Studio.
0 Votes
Community posted 10 months ago Admin
Posted by “BloodyHanna” on August 13, 2023.
[Archived]I mean post it in shop but do not send it to peer and it will show in the studio
0 Votes
Community posted 10 months ago Admin
Posted by “BloodyHanna” on August 13, 2023.
[Archived]I have a simular problem and the staff is still looking into it...i did find a loophole how to use the studio - till it starts working properly ( my problem is that the FBX is unknown it just dusn't download properly, donno why)
But now i use the old client to upload my project the moment i save it ( as a project, do not put it for sale yet and don't go to peer) , thankfully after you open the studio its shown and you can finish editing it in there .
this I share as an alternative if you are unable to work it out. I do hope it works out and you don't have to do those gymnastics :)
0 Votes
Community posted 10 months ago Admin
Posted by “MightySe7en” on August 08, 2023.
[Archived]@Mocapanimations Try going to "Documents/IMVU Studio Projects/[CID]" and removing the "_fbx" folder. You should back up this folder before deleting it just in case. I believe your issue may be with this folder being too large, it is an issue we have been looking into, and the size of the folder seems to vary by user.
0 Votes
Community posted 10 months ago Admin
Posted by “MightySe7en” on August 08, 2023.
[Archived]Hey @Mocapanimations , I tried importing the file myself and it worked. I believe the issue is with studio and we have seen it before. I will talk to my team and get the solution to you ASAP!
0 Votes
Community posted 10 months ago Admin
Posted by “Mocapanimations” on August 08, 2023.
[Archived]Email sent @MightySe7en , thank you so much :)
0 Votes
Community posted 10 months ago Admin
Posted by “MightySe7en” on August 07, 2023.
[Archived]@Mocapanimations If you are comfortable doing so, could you email your FBX to studio@imvu.com and I will take a deeper look
0 Votes
Community posted 10 months ago Admin
Posted by “Mocapanimations” on August 06, 2023.
[Archived]Hi @MightySe7en and @LestatDeLioncourt , the FBX contains only skeleton animation, and isn't a heavy one, just 2846kb.
0 Votes
Community posted 10 months ago Admin
Posted by “LestatDeLioncourt” on August 06, 2023.
[Archived]Also, just to add in conversation... I have seen this with super heavy FBX Files.
What is the Kb Size of your File, @Mocapanimations ?
0 Votes
Community posted 10 months ago Admin
Posted by “MightySe7en” on August 05, 2023.
[Archived]Hi @Mocapanimations,
Is this a workflow you've done before? That way we know the issue is likely with studio and not the file. I have had issues in the past when I import an animation and there's no actual animation data, it will just sit and load.
0 Votes