Is there going to be any update where your avitar can be in the same scene as decorating tools...its not possible to take creative shots as you cant see where the light is rotating to where you need it. Also im still finding when i go back to edit a studio room all the opacity settings turn off. I have to manually reset every one everytime and then when i go into core to check they are all over the shop...constantly going back and forth between the two. A save product should save settings.
Im not even confident after i submit anymore. Again this morning same thing...its been 2 hours of just frustration as i see one thing and gatho sees no opacity even after submission.
Im really wary submitting products to the catalogue with this happening still as what i see when ive saved isnt what appears after submission.
All i needed to do today was take a pic of the new studio room with an added light on the avitar to show the possibility of the photo room but i just cant. In core its instant in studio its impossible.
0 Votes
10 Comments
Sorted by
C
Communityposted
2 months ago
Admin
Posted by “Drosselmeyer” on February 10, 2023.
[Archived]
@RainEvenMorn Actually, this turns out to be a slightly different bug and an engineer here has a fix for Transparency getting set to 'None' when you open a product for edit. It "should" be in our next Studio release.
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “Drosselmeyer” on February 09, 2023.
[Archived]
@RainEvenMorn A new release of Client 544.6 is available which "should" have fixed the opacity settings issue effecting the clouds ^^
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “Drosselmeyer” on February 08, 2023.
[Archived]
Re: screenshot, ah yeah, that is the other bug that is the bane of my existence right now. There is a fix in the works for this too.
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]
thanks Greg you know im all about mood :P
seems the viewing might be bug related yes.
This is a screen shot of the published room in studio if i open edit. this happens to all of my studio rooms its not an isolated problem.
Hi @RainEvenMorn, Hmm.. this is concerning: "after i submit and publish if i have to go back to edit (which i always do bc of core) all my opacity settings are removed each and everytime. There is neither alpha or composite checked, nothing." I have not seen this behavior myself.
Regarding the issue with the clouds, this has a fix coming, but I am a bit concerned that users are not seeing the issue consistently. I am alerting the team.
The room looks really good btw!! Nice mood!
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]
To add more info - gatho viewed it with bad opacity yesterday, we had invited another and they saw it like i did. Later in evening he saw it with propper blending. I submitted and published.
he then brought it - overnight for some reason it reverted to Bad opacity so he invited another customer who also saw it with bad opacity although when i view it its good. Whats happening?
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]
PID 62538944
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]
Thanks Greg... after i submit and publish if i have to go back to edit (which i always do bc of core) all my opacity settings are removed each and everytime. There is neither alpha or composite checked, nothing.
whats even more of a worry is this AND why i mostly dont create for studio anymore. I see one thing others see different.
I just had to hid my finished product yet again bc of this -------> this is a submitted and published room and the opacity setting for the clouds
see the clouds??? they have somehow gone to alpha from composite?? but mine stay on composite???
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “Drosselmeyer” on February 07, 2023.
[Archived]
Hi @RainEvenMorn, There is a bug with opacity settings and the Client that being worked on and we will have a fix for soon. There is another issue I have found where, every time you switch an opacity map the transparency setting gets set to 'Alpha Test'. I am writing this up as a bug. The default should be 'Alpha Test', but if the user switches the setting it should stay with what ever the user selected. I do not see that opacity map settings are changing when editing in Studio. Is this what you are seeing: Derive > Add opacity map > Set to 'Composite Blend' > Save > Submit > Open submitted PID for Edit > Opacity is set to 'Alpha Test'?
0 Votes
C
Communityposted
2 months ago
Admin
Posted by “RainEvenMorn” on February 07, 2023.
[Archived]
LOL..i give up. finally after 5hrs? i get a shot and have this above my head?
Posted by “RainEvenMorn” on February 07, 2023.
[Archived]Is there going to be any update where your avitar can be in the same scene as decorating tools...its not possible to take creative shots as you cant see where the light is rotating to where you need it. Also im still finding when i go back to edit a studio room all the opacity settings turn off. I have to manually reset every one everytime and then when i go into core to check they are all over the shop...constantly going back and forth between the two. A save product should save settings.
Im not even confident after i submit anymore. Again this morning same thing...its been 2 hours of just frustration as i see one thing and gatho sees no opacity even after submission.
Im really wary submitting products to the catalogue with this happening still as what i see when ive saved isnt what appears after submission.
All i needed to do today was take a pic of the new studio room with an added light on the avitar to show the possibility of the photo room but i just cant. In core its instant in studio its impossible.
0 Votes
10 Comments
Community posted 2 months ago Admin
Posted by “Drosselmeyer” on February 10, 2023.
[Archived]@RainEvenMorn Actually, this turns out to be a slightly different bug and an engineer here has a fix for Transparency getting set to 'None' when you open a product for edit. It "should" be in our next Studio release.
0 Votes
Community posted 2 months ago Admin
Posted by “Drosselmeyer” on February 09, 2023.
[Archived]@RainEvenMorn A new release of Client 544.6 is available which "should" have fixed the opacity settings issue effecting the clouds ^^
0 Votes
Community posted 2 months ago Admin
Posted by “Drosselmeyer” on February 08, 2023.
[Archived]Re: screenshot, ah yeah, that is the other bug that is the bane of my existence right now. There is a fix in the works for this too.
0 Votes
Community posted 2 months ago Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]thanks Greg you know im all about mood :P
seems the viewing might be bug related yes.
This is a screen shot of the published room in studio if i open edit. this happens to all of my studio rooms its not an isolated problem.
https://gyazo.com/643b8de34cbf4350cd6a18c40405ca83
0 Votes
Community posted 2 months ago Admin
Posted by “Drosselmeyer” on February 08, 2023.
[Archived]Hi @RainEvenMorn, Hmm.. this is concerning: "after i submit and publish if i have to go back to edit (which i always do bc of core) all my opacity settings are removed each and everytime. There is neither alpha or composite checked, nothing." I have not seen this behavior myself.
Regarding the issue with the clouds, this has a fix coming, but I am a bit concerned that users are not seeing the issue consistently. I am alerting the team.
The room looks really good btw!! Nice mood!
0 Votes
Community posted 2 months ago Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]To add more info - gatho viewed it with bad opacity yesterday, we had invited another and they saw it like i did. Later in evening he saw it with propper blending. I submitted and published.
he then brought it - overnight for some reason it reverted to Bad opacity so he invited another customer who also saw it with bad opacity although when i view it its good. Whats happening?
0 Votes
Community posted 2 months ago Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]PID 62538944
0 Votes
Community posted 2 months ago Admin
Posted by “RainEvenMorn” on February 08, 2023.
[Archived]Thanks Greg... after i submit and publish if i have to go back to edit (which i always do bc of core) all my opacity settings are removed each and everytime. There is neither alpha or composite checked, nothing.
whats even more of a worry is this AND why i mostly dont create for studio anymore. I see one thing others see different.
I just had to hid my finished product yet again bc of this -------> this is a submitted and published room and the opacity setting for the clouds
My view in core = https://gyazo.com/cedba99f14d13e57227473bf2466e873
when others buy it = https://prnt.sc/6k7FZVlf08WN
see the clouds??? they have somehow gone to alpha from composite?? but mine stay on composite???
0 Votes
Community posted 2 months ago Admin
Posted by “Drosselmeyer” on February 07, 2023.
[Archived]Hi @RainEvenMorn, There is a bug with opacity settings and the Client that being worked on and we will have a fix for soon. There is another issue I have found where, every time you switch an opacity map the transparency setting gets set to 'Alpha Test'. I am writing this up as a bug. The default should be 'Alpha Test', but if the user switches the setting it should stay with what ever the user selected. I do not see that opacity map settings are changing when editing in Studio. Is this what you are seeing: Derive > Add opacity map > Set to 'Composite Blend' > Save > Submit > Open submitted PID for Edit > Opacity is set to 'Alpha Test'?
0 Votes
Community posted 2 months ago Admin
Posted by “RainEvenMorn” on February 07, 2023.
[Archived]LOL..i give up. finally after 5hrs? i get a shot and have this above my head?
https://gyazo.com/1570f428e18ddb6f52bb83e5e43e09bb
Trying to accomplish anything in studio/beta is a punish
0 Votes